SEL-2890

SEL-2890 Ethernet Transceiver

Ordering Information

Budgetary Price:
$360

Fully Optioned Price:
$430

Online Product Configuration

Adds Ethernet connectivity to an SEL device using its EIA-232 serial port.

  • Connects EIA-232 Port to 10BASE-T Ethernet Connection

  • Powered by 5VDC in EIA-232 Connector

    • Supplied via jumper in most SEL device serial ports
    • Supplied through SEL-C642 Cable for use with PC or other devices

     

  • Hardened for Substation Environment
    Same design and type-testing as applied to critical protective relays

  • Supports Telnet for ASCII Dialogs Hosts Web Page

    • Access relay data with web browser software on your private network
    • Includes default Web page, hosted in SEL-2890
    • User Definable Web Page: upload web page with FTP, edit in PC, download with FTP

     

  • Allows Setting From PC Using Terminal Emulation Software and C642 configuration cable

    • Configure network addressing parameters
    • Enable/disable features

     

  • Sends Email Automatically
    Specify address via setting

  • Use SEL-2890 Transceivers and your Ethernet network instead of expensive leased or dial-up connections to reduce monthly operating costs. Connect to a serial port on your PC to operate proprietary device-support software through an Ethernet network without modifying the PC software. Replace a multidrop wired network (e.g., serial Modbus®).

  • Communicate with sites that have valuable data where leased or dial-up lines were too costly. Use Telnet software for ASCII terminal connections to check the status, read metering data, or to examine history of event records. Use familiar Web browser interfaces to easily view information with minimal training. The SEL-2890 Transceiver provides a Web page. Customize the Web page using your browser FTP features. Set the transceiver to send email when power system faults occur, including the fault type and location. Send SEL relay automatic messages to specified addresses for quick notification and logging. Use SEL-5010 Relay Assistant Software with Ethernet Option to manage the settings for relays connected to the host SEL-2032/2030. Email automatic messages from the relay.

  • Use SEL-5040 Power System Report Manager Software to automatically gather relay event reports on your PC and manage them with a database.

  • C627 Shielded Twisted-Pair Ethernet Cable high-quality shielded twisted-pair (STP) Category 5e Ethernet cable

     

    SEL Part Number Length
    C627 1 meter
    C627 5 meters
    C627 15 meters
     

  • Serial Configuration and Data Cable if ordered separately from SEL-2890
    SEL Part Number: SEL-C642

  • USB Configuration and Data Cable
    SEL Part Number: SEL-C663

Data Sheets

Guideform Specification

Instruction Manuals

If you are not logged in you may not be able to view all of the content available.

To login use the link in the MySEL section at the top of this page.

Application Guides

If you are not logged in you may not be able to view all of the content available.

To login use the link in the MySEL section at the top of this page.

Case Studies

Flyers

Access drawings via the Online Product Configuration link in the Ordering Information box at the top right of this page (below the product photo).

From the Product Configuration page, configure your product or enter your part number via the Universal Part Number Reverse Lookup. Then, download custom .dwg or .pdf files, specific to your product.

You may also go directly to the Product Configuration page to make a product selection.
GSA_Logo

Schweitzer Engineering Laboratories, Inc.

2350 NE Hopkins Court
Pullman, WA 99163 - USA
Phone: +1.509.332.1890
Fax: +1.509.332.7990
© 2009 SEL  | SEL Links  | SEL Expert  | SEL Latin America  | SEL Mexico  | SEL Brazil  | SEL China