SEL is pleased to announce version 4.5.1.9 of
ACSELERATOR QuickSet, which released September 4, 2008. This new version:

• Added 734 011 device support
• Allow 451-4 Bay Control to use custom mimic images
• Fixed issue with 2411 003 Display point helper form not opening

Other Recent Releases:

• Version 4.5.0.8 released July 11, 2008 and included:
  • Added 2411 003 device support
  • Added 352 device support
  • Added 487E 001 device support
• Version 4.5.0.2 released June 6, 2008 and included:
  • Fixes SEL-351R HMI from not being able to load
• Version 4.4.2.11 released May 15, 2008 and included:
  • Added 2431 002 device support
  • Added 787 001 device support
  • Added 2523 001 device support
  • Added 2414 003 device support
  • Fixed install issue incorrectly detecting quickset.exe running
  • Fixed issue with 2431 drivers copying group 1 settings to other groups
• Version 4.4.0.0 released April 4, 2008 and included:
  • Added support for ACSELERATOR QuickSet and QuickSet Designer to use SEL Compass to handle install, uninstall, and updates.
• Version 4.3.12.0 released March 11, 2008 and included:
  • Fixed an issue with not being able to read or send settings by FTP
• Version 4.3.11.0 released March 5, 2008 and included:
  • Fixed an issue with setting validation when using aliases in 4xx devices
• Version 4.3.10.0 released February 28, 2008 and included:
  • Added 351A-1 001 device support
  • Added Vista compatibility
• Version 4.3.8.0 released January 15, 2008 and included:
  • Added 487B 004 device support
  • Bug fixes for 351R HMI
  • Bug fixes for 387E HMI
  • Bug fixes for 551 HMI
  • Bug fix in 551 and 387 Drivers when reading in blank Text (set T) settings
  • Bug fixes in 311L Drivers
  • Bug fixes in 300G Drivers
  • Bug fixes in 4xx Drivers
• Version 4.3.7.0 released December 28, 2007 and included:
  • Added SEL-351A 009 device support
  • Fixed SEL-421 issue with DNP IP map addresses
• Version 4.3.3.0 released December 6, 2007 and included:
  • Added support for Hybrid 4DO\4DI card in 751A
  • Fixed issue with 351R error when overcurrent time dials are set less than 0.1
  • Fixed issue with 651R display points allowing incorrect values
• Version 4.3.1.0 released November 16, 2007 and included:
  • Fixed comments issue in 421 SITM settings and 487B Zone Settings when upgrading from version 4.1.34.0 or 4.1.30.0
• Version 4.2.3.0 released November 8, 2007 and included:
  • Updated group list shown when sending settings
  • Improved handling of communication with devices
  • Fixed issue with comments causing setting to be read incorrectly
• Version 4.1.34.0 released October 5, 2007 and included:
  • General maintenance release
  • Added ability to only export active settings
  • Fixed issue with sending DNP Map settings in 4xx devices
  • Added 587 001 device support
  • Added 734 010 device support
• Version 4.1.30.0 released August 30, 2007 with the following new enhancements:
  • Added 751A 001 device support
  • Added 751A 002 device support
  • Added 300G 302 device support
  • Updated 2411 002 driver
  • Fixed 2431 HMI
  • Added ability to associate comments with settings.

• Version 4.1.27.0 released August 8, 2007 with the following new enhancements:
  • Added 2411 002 device support
  • Added 451 010 device support
• Version 4.1.24.0 released July 13, 2007 and fixed a general HMI issue on load.
• Version 4.1.23.0 released July 3, 2007 with the following new enhancements:
  • Added 387A 004 device support
  • Added 2431 001 device support
  • Added 451 009 device support
• Version 4.1.16.0 released May 31, 2007 and added 734 009 device support.
• Version 4.1.14.0 released April 24, 2007 and fixed an issue with the 734 4DO settings being hidden incorrectly.
• Version 4.1.11.0 released March 22, 2007 and added 710 002 and 749M 003 device support and added HMI support for 487B 003 devices.
• Version 4.1.5.0 released March 2, 2007 and included 451 008 device support, 421 010 device support, 734 008 device support, and fixed an issue with power element ranges on 351 008 and 351S 008 devices.
• Version 4.1.2.0 released January 31, 2007 and added 351 008 device support, 351A 008 device support, and 351S 008 device support.
• Version 3.1.72.0 released December 22, 2006 and included fixes to several minor application bugs; added ability to select groups/classes when reading from devices; and added ability to select subgroups in the printing of device settings.
• Version 3.1.67.0 released November 22, 2006 with updated polling time for 734 HMI ASCII tasks to work more consistently over ethernet connections.
• Version 3.1.66.0 released November 8, 2006 with the following new enhancements:
  • Added support for 701 003 and 701 004 devices
  • Added support for 351R-2 005 device
  • Fixed printing issue with Graphical Logical Editor
• Version 3.1.61.0 released September 27, 2006 and added support for 734 007 Meter, added VS to phasors in the SEL-300G HMI, fixed SEL300G 301 error that was causing PROTO to be missing MOD as an option, and corrected SEL-300G defect where IRS1 was not being hidden when SLP2 was set to OFF.
• Version 3.1.59.0 released August 23, 2006 and added support for the 710 001 device, SEL-311L-1 102 and 311L-7 102 devices, and fixed a 734 006 transformer line loss issue.
• Version 3.1.53.0 released August 4, 2006 and fixed a refresh issue when using Template Settings.
• Version 3.1.48.0 released August 4, 2006 and fixed an issue with not being able to read settings from an SEL-551C without front port; added support for SEL-311L 009; and added support for SEL-351A 007; 351S 007, and 351-5, -6, -7 devices.
• Version 3.1.44.0 released July 21, 2006 and added support for SEL-421-2 R008, SEL-421-3 R008, SEL-451 R006, SEL-487B R003, SEL-311L R101, and SEL-387E R101 devices; fixed an issue with SEL-2411 R001 Y-modem file transfer error; and fixed an issue with SEL-2411 R001 logic settings.
• Version 3.1.38.0 released May 26, 2006 and added support for the SEL-734 R006 meter and fixed an issue with the SEL-451 not being able to send port 5 setting to device.
• Version 3.1.30.0 released May 8, 2006 and changed the range for DNP Serial Binary Output Mapxxx and Ethernet BO_MAPxx in the SEL-451 driver.
• Version 3.1.29.0 released April 20, 2006 and changed installer to allow web download of drivers; added auto update utility which allowed AcSELerator QuickSet Designer to check and download updates automatically: revised appearance of the main user interface page; added support for SEL-311A R004,311B R004, 311C R005, 311L R008, 451 R005, 651R R004, and 300G R301; and updated 2411 name to Programmable Automation Controller.

• Version 2.5.5.3 released February 14, 2006 and fixed an error with not loading SEL-734 settings.
• Version 2.5.4.3 released February 7, 2006 and added SEL-421 R007 and SEL-451 R004 support.
• Version 2.5.3.11 released January 3, 2006 and added SEL-2411 R001 I/O processor support and included the SEL-351S R003 and R005 driver missing part number option.
• Version 2.5.1.19 released December 20, 2005 and fixed an issue when upgrading from version 2.4.11.6 that some devices may not be available for use by ACSELERATOR QuickSet SEL-5030 software and fixed inability of
  ACSELERATOR QuickSet SEL-5030 software to send settings to 351R based on certain EZ settings.
• Version 2.5.0.8 released November 4, 2005 and added support for the SEL-551 and SEL-551C Relays and support for DNP3 LAN/WAN (Ethernet) for the following products
  • SEL-421 SVN 006, first released in firmware version R115.
  • SEL-451 SVN 003, first released in firmware version R106.
  • SEL-487B SVN 002, first released in firmware version R108.
• Version 2.4.11.6 released September 13, 2005 and added support for the SEL-734 Metering System with settings version SVN-005, first released in firmware versions R112 and R512.
• Version 2.4.10.9 released August 4, 2005 and added the capability to use Application Designs, created with the ACSELERATOR QuickSet SEL-5031 QuickSet Designer. This version also added support for SEL-421 and SEL-421-1 relays with settings version SVN-005, first released in firmware version R114.
• Version 2.4.9.7 released July 18, 2005 and added support for the SEL-351R-2 recloser controls with firmware revision R302 or newer.
• Version 2.4.8.26 released July 8, 2005 and added support for the SEL-351R-2 004, added RTS to port parameters form, fixed a problem with the SEL-300G 300 not allowing to choose Modbus, and added a message when using the copy function in settings editor to let users know that setting values will not be copied to settings used by Application Design.
• Version 2.4.7.8 released May 5, 2005 and added support for the SEL-734 firmware version R110/R510 and SEL-451 firmware version R105, included counter values in the available equation builder analog selections for the SEL-734, improved operation for SEL-421 firmware version R113 involving compares, merges, and SER.
• Version 2.4.6.9 released April 13, 2005 and added SEL-451 002 support, fixed an issue with SEL-421 004 relay compare feature giving an invalid part number dialog, updated installer to allow users to choose which drivers they want installed, updated part number forms to look consistent amongst all drivers, and removed WhatsNew.txt file from the install.
• Version 2.4.5.15 released March 21, 2005 and added support for the newest version of the SEL-2100 Logic Processor, SVN-003.
• Version 2.4.4.15 added support for SEL-387E
• Version 2.4.3.15 added PASTE function, ability to change fonts for terminal window, and support for newest versions of SEL-421, 351, 351A, and 351S Relays.
• Version 2.4.2.19 added improved support for SEL-387-5 and SEL-387-6 Current Differential and Overcurrent Relays and the new software version of the SEL-749M Relay
• Version 2.4.1.20 added support for SEL-387-5 and SEL-387-6 Relays and ACSELERATOR SEL-5030-2 Software Application Design support
• Version 2.2.5.0 added clarification that the user must be a member of the Administrator User class to use the software.
• Version 2.2.4.7 added support for the SEL-300G.
• Version 2.2.3.6 of the ACSELERATOR software allowed users other than those with administrative rights to use ACSELERATOR, and included modifications for the SEL-734 Meter and SEL-451 Relay.
• Version 2.2.2.2 of the ACSELERATOR software added support for SEL-387L and SEL-451 Relays and support for additional DNP settings in SEL-311L products.
• Version 2.2.1.3 has the same features as 2.2.2.2 , but had some compatibility issues with Windows 95 and 98 operating systems.
• Version 2.1.9.17 of the ACSELERATOR software included support for the SEL-651R, including additions to the SEL-651R DNP communications capabilities to enhance its application as a pole-mount RTU.
• Version 2.1.8.14 included support for the SEL-651R Recloser Control and the SEL-749M Motor Relay, and for new software versions of the SEL-734 Meter, and SEL-311L Line-Current Differential Relay. This release also included changes to many of the "help" screens, and fixed an issue in the SEL-2100 software.
• Version 2.1.7.28 addressed several log items, including correction of problems with time settings in the graphical logic editor, and with the SEL-2100 Logic Processor HMI.
• Version 2.1.7.22 added support for the newest versions of the SEL-421 Relay and the SEL-734 Meter.
• Version 2.1.7.17 provided support for the newest versions of the SEL-421 relay, and corrects some log items for the SEL-421 and SEL-351 support. This software release also addressed some installation issues supporting elements Reader32.dll and label.lib.
• Version 2.1.6.4 provided support for the SEL-487B Bus Protection Relay and SEL-734 Revenue Metering System.
• Version 2.0.2.3 This version eliminates some unneeded "OUT OF RANGE" messages for the SEL-351 5,6,7, SEL-351A or SEL-351S, related to settings dependent on the VSCONN or PTCONN settings.
• Version 2.0.1.9 enabled users of the SEL-5010 Relay Assistant to use ACSELERATOR editors to create and edit settings within the SEL-5010 environment.
• Version 1.5.3.0 supports SEL-351S versions that include Enhanced Best Choice Ground Directional Element™ and Petersen Coil, ungrounded, or impedance grounded application support, and delta-connected voltage transformer input capability.
• Version 1.5.2.8 is superceded by version 1.5.3.0, and has the same externally visible features.
• Version 1.5.2.2 supports SEL-311A, 311B, 311C, and SEL-311L (single pole trip versions), and SEL-351A versions that include delta-connected voltage transformer input capability.
• Version 1.5.1.13 supports SEL-421, SEL 421-1 (firmware version R103), and SEL-351-5, 6, 7 versions that include delta-connected voltage transformer input capability.
• Version 1.5.1.13 supports the synchrophasor capabilities of the SEL-421 Relay.
• Version 1.3.1.8 provided reliable operations of the ACSELERATOR and the SEL-2100 Logic processor at 9600 bps or higher.

• Version 1.3.1.6 provided support for the following:
  • SEL-421-1 Relay
  • SEL-351-5, 6, 7 versions that include the enhanced Best Choice Ground Directional Element™ and Petersen Coil, ungrounded, or impedance grounded application support.

Download Page Here

.